Blog
Good display's Blog
By Engnieer Liu | 21 May 2024 | 0 Comments

How to custom Touch Screen?

For product design engineers, opting for a custom touch display solution proves to be the optimal approach for meeting their distinctive application requirements. We offer data-driven recommendations and unwavering support throughout the process. Our adeptness in the field has translated into a documented history of significant victory, even in the face of the most challenging applications.

 

 

Even small design tweaks, features and requirements that diverge from a standard setup would best be handled via a custom process. Every add-on and suggestion is feasible — but is best suited for a custom design, so it’s imperative that the goals of the design are clear before concepting begins.

 

Additionally,“standard” often implies “cheaper,” but that's not always the case. Customized touchscreen display products can be designed specifically with cost efficiency in mind, so application-specific implementations can actually generate reduced unit production cost.

 


 

Here are some points you need to know

 

1. Dimension

Slightly smaller than the outer dimensions of the e-paper display screen by default.

 

2. Thickness

Typical thickness: 0.25mm (single layer), 0.35mm (double layer).

 

3. Anti-Glare Film

With Cover Glass, No anti-glare film required.

Without Cover Glass, it is usually recommended to add an anti-glare film.

 

4. Driver

Below 4.2 inches: FT6336

5.83 inches and above:FT5436  or  GT911

Customer specified: Evaluate according to customer requirements.

 

5. Gesture Touchscreen

Not supported by default (customizable).

 

6. Length of FPC

FPC PIN Definition: 

Default 6 pins 1-GND、2-INT、3-RST、4-VCC、5-SCL、6-SDA

Customer specified: Design according to customer requirements.

FPC length and orientation:

Customer unspecified: Defaults to match standard specifications.

Customer specified: Design according to customer requirements.

 

7. Bonding Type

OCA bonding: Optical OCA adhesive is used for bonding, with a minimum OCA thickness of 0.175mm.

Tape bonding: Not recommended.


 

The 5-step development process

 

1. Definition

 

To start, all stakeholders need to agree on the what, where, why and how. Good Display likes to begin with a preliminary questionnaire that covers items like:

 

  • What problem are you trying to solve?
  • How does this product solve that problem?
  • What is the product, application and timeline you're working from?
  • Why are certain requirements (size, shape, etc.) needed?

2. Concept

At this stage, we build samples based on tooling orders to justify proof of concept.

3. Design

Once a preliminary quote and proof of concept are approved, we offer a final, formal quote for the project and make a production order for materials required. The custom touchscreen and/or display components are now ready to be fully designed and engineered.

4. Validation

You as the customer validate the efficacy of the custom design, and all parties agree to move into the larger production phase.

5. Production

Beginning with a short-run production of the part(s) and culminating in the final mass-produced version, Good Display prepares the quantities necessary for a product launch.

 

 

Our Standard Touchscreen

 

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code